Coden Pro
Coden Pro
Coden Pro is the most advanced competition wing in our offer. With its CCC rating you can take it to any FAI competition.The design team focused on reaching the best compromise between safety and performance.
Design and purpose
Carefully tuned airfoil provides the Coden Pro with high resistance to frontal collapses even at maximum speed.
Due to the Flexi Edge technology, reduced number of suspension lines, four-part rods and 7.50 aspect ratio the Coden Pro demonstrates excellent performance. At that, maximum possible safety level was attained, as confirmed in successful passing the CCC certification process.
According to new requirements for CIVL competition class paragliders (valid from 1 October 2016), flight tests are to be conducted at trim speed and accelerated by 100-105 mm (difference between A and B risers with speedsystem engaged). The maximum acceleration must not exceed 140 mm.
Because our Coden Pro has passed tests along exactly these lines, we have the newest certificates for all three sizes. As current rules allow use of longer speed systems, all newly produced wings (from the beginning of 2017) will be equipped with accordingly modified risers. The additional speed range will be marked with red lines. The CCC 2017 risers will also feature our new system to hold the steering handles – Smart Lock.
Both the original and current risers are CCC certified and can be used in competitions.
Pilots wishing to upgrade the originals can purchase the current version for independent assembly.
While thermalling the Coden Pro is very predictable, allowing for comfortable flight. Special handles present pilot with precise canopy control when using full speedbar. Progressive steering makes possible both steep turns in strong cores, and flat circles in weak lift.
During long testing hours the paraglider was behaving exceptionally good, and our beta testers univocally praised it.
The Coden Pro is manufactured with new technology, employing precision of the laser cutting. All stages of production are completed in Poland under strict supervision of the designer himself, thus ensuring highest European quality.
Certification
All Coden Pro has already passed the CCC tests.
CIVL Competition Class (CCC) is a new category of certification, created especially for the high-performing competition paragliders. It has been in operation since January 1st, 2015.
Test procedure is generally close to EN D standard, the exception being performing the tests only in the upper weight limit, and allowing pilot’s reaction within 3 seconds (5 seconds in EN D standard). Also some of the manoeuveres are not executed.
Design solutions, technologies and other functionalities are listed below in the Technologies section.
Construction solutions
Technologies, concepts
Risers functionality
Used solutions
Colours
Air
See
Earth
See
Water
See
Fire
See
Parameters
Weight ranges
TECHNICAL DATA
| Name – size | Coden Pro 20 | Coden Pro 23 |
Coden Pro 25 |
| Certification | CCC | CCC | CCC |
| Cell number | 98 | 98 | 98 |
| Surface flat [m2] | 20.50 | 23.50 | 25.50 |
| Surface projected [m2] | 17.30 | 19.83 | 21.52 |
| Wingspan flat [m] | 12.40 | 13.27 | 13.83 |
| Wingspan projected [m] | 9.90 | 10.60 | 11.04 |
| Aspect ratio flat/projected | 7.50 / 5.67 | ||
| Longest chord [mm] | 2100 | 2249 | 2342 |
| Shortest chord [cm] | 441 | 473 | 492 |
| Lines length (incl. risers) [m] | 7.57 | 8.10 | 8.44 |
| Total lines length [m] | 213.83 | 229.41 | 239.24 |
| Canopy weight [kg] | 5.8 | 6.3 | 6.6 |
| Take-off weight [kg] | 80-95 | 95-115 | 110-130 |
| Lines | Edelrid A-8000U: 050; 070; 090; 120; 130; 200; 230; 280; 360 Liros TSL00-0090; 0190 | ||
| Cloth | Porcher Universal 32; 38 g/m2, Porcher Classic 27 g/m2, Porcher Hard 27; 32; 40 g/m2, SR Scrim, SR Laminate 180 g/m2 | ||
| Risers | COUSIN TRESTEC – Francja; PASAMON – Polska | ||
